Inserting the battery – Panasonic RRXS350E User Manual

Page 7

Advertising
background image

7

Use an alkaline battery.

Remove the battery from the unit if you will not use it
for a long period of time.

1 AAA LR03 battery (not supplied)
Make sure the battery faces the
right direction.

The remaining battery level is displayed as below
while this unit is operating.

Blinking

If the battery runs out, “

” blinks. Replace the

battery as soon as possible.

When the battery runs out of power, “

” is

indicated and then the power turns off automatically.

Depending on the battery status or the operation
content to use, even if the power turns off due to the
battery exhaustion, this unit may be used for a while if
turned on again. However, the unit may suddenly turn
off during operation due to the low level of battery.

Some level of battery is required when performing
deleting files, formatting (➜ page 14), and dividing

files (➜ page 27). If the battery indicator shows “

(blinking) and these operations are performed, the
power turns OFF due to the battery exhaustion.

Make sure to turn the power off before removing
the battery.

• If the battery is removed while the unit is on, data

may be lost or this unit may be damaged.

Set the clock after inserting a battery for the first time
or replacing the battery. (➜ page 9)

Inserting the battery

Battery/SD card slot
cover

Open the battery/SD card slot cover (

1

and

2

)

Close the battery/SD card
slot cover (

4

and

5

)

VQT4J69

7

ENGLISH

VQT4J69_RR-XS350_E_En.indd 7

VQT4J69_RR-XS350_E_En.indd 7

2012/05/25 11:47:54

2012/05/25 11:47:54

Advertising