Panasonic DMRE95H - Manual (Page 16)

16
RQT7463
Reco
rd
in
g
Recording television programmes
[HDD] [RAM] [DVD-R]
≥ It is not possible to record to both HDD (Hard disk drive) and DVD
drive simultaneously.
≥ You can record up to 500 titles on HDD, 99 titles on one disc.
≥ It is not possible to record continuously from one side of a double sided
disc to the other. You will need to eject the disc and turn it over.
≥ When using 8 cm DVD-RAM, remove the disc from the cartridge.
≥ It is not possible to record CPRM ( ➡ page 53) protected material
onto DVD-R or 2.8 GB DVD-RAM discs.
≥ It is not possible to record to a card.
1
Press [HDD] or [DVD] to select the
recording drive.
The HDD or DVD indicator lights up on the unit.
2
If you selected the DVD drive
Press [ < OPEN/CLOSE] on the main
unit to open the tray and insert a disc.
≥ Press the button again to close the tray.
3
Press [ W X CH] to select the channel.
To select with the numbered buttons:
4
Press [REC MODE] to select the
recording mode (XP, SP, LP or EP).
≥ To record sound using LPCM (XP mode only):
Set the “Audio Mode for XP Recording” to “LPCM” in the
SETUP menu (
➡ page 47).
5
Press [ ¥ REC] to start recording.
Recording will take place on open space on the HDD or on
disc. Data will not be overwritten.
≥ You cannot change the channel or recording mode during
recording.
≥[HDD] [RAM] You can change the audio being received by
pressing [AUDIO] during recording. (Does not affect the
recording of audio.)
∫ To stop recording
Press [ ∫ ].
From the start to the end of the recording is called one title.
[HDD]
When continuously recording for long durations, titles are
automatically divided every 8 hours.
[DVD-R]
It takes about 30 seconds for the unit to complete recording
management information after recording finishes.
∫ To pause recording
Press [ ; ].
Press again to restart recording.
(Title is not split into separate titles.)
When transferring (dubbing) in high speed mode to DVD-R
after you have recorded to the HDD.
When transferring (dubbing) a title using the high speed mode to
a DVD-R, set “DVD-R Rec for High Speed mode” to “On” before
recording to the HDD (
➡ page 46).
However, the following restrictions apply.
≥ When recording bilingual broadcasts, only the audio selected in
“Bilingual Audio Selection” ( ➡ page 47) is recorded (“M 1” or
“M 2”).
≥ Even 16:9 aspect (Widescreen) programmes are recorded in
4:3 aspect.
≥ Even if “Hybrid VBR Resolution” is set to “Automatic”, it
changes to “Fixed” automatically, and the “Automatic” setting
does not work (
➡ page 46).
When recording to DVD-R
≥ When recording bilingual broadcasts, only the audio selected in
“Bilingual Audio Selection” ( ➡ page 47) is recorded (“M 1” or
“M 2”).
≥ In order to play a DVD-R recorded using this unit on
another playback source, the disc must first be finalized
(
➡ page 43).
OPEN/CLOSE
REC
/x1.3 TIME SLIP
CH TIME SLIP
DRIVE SELECT SD PC DVD HDD
SD CARD PC CARD EJECT
HDD DVD
2 1 5
TIME SLIP
3
∫ 1
VOLUME CH DIRECT TV REC
DVD
TV
AV
1 2 3
4 5 6
7 8
0
9
MANUAL SKIP
ShowView
CH
CANCEL INPUT SELECT
SKIP
STOP PAUSE PLAY/x1.3
SLOW/SEARCH
FUNCTIONS
ENTER
DIRECT NAVIGATOR
TOP MENU
RETURN SUB MENU
CREATE
CHAPTER
TIMER
EXT LINK
PROG/CHECK
REC MODE ERASE REC
AUDIO
TIME SLIP STATUS DISPLAY
F
A B C
DUBBING
HDD DVD SD/PC
3 , 4,2 , 1
ENTER
¥ DIRECT
TV REC
INPUT SELECT
STATUS
DIRECT
NAVIGATOR
F TIMER
∫
;
1
FUNCTIONS
RETURN
TIME SLIP
AUDIO
5
3
1
4
HDD, DVD indicator
Numbered
buttons
Time Slip indicator
e.g., 5: [0] ➡ [5]
15: [1] ➡ [5]
Insert with the arrow facing in.
Insert fully so it clicks into place. Insert label-up.
HDD
EXT Link
SD PC XP XP XP
SP
LP LP LP
EP EP EP
REC PLAY
HDD
EXT Link
SD PC XP
SP
LP
EP
REC PLAY
Remaining time on the disc
HDD
EXT EXT Link Link
XP
SP SP SP
LP LP
EP EP
REC PLAY PLAY PLA
16
7463en.book Page 16 Tuesday, March 8, 2005 11:07 AM