Panasonic DMRE95H - Manual (Page 46)

46
RQT7463
Con
v
e
n
ie
nt
f
unc
tions
Changing the unit’s settings
Tabs Menus Options (Underlined items are the factory presets.)
Disc Language
Choose the language for audio, subtitle and disc menus.
[DVD-V]
≥ Press [ENTER] to show the following settings.
≥ Some discs start in a certain language despite any changes you make here.
≥ In case of English/French/German/Italian/Spanish languages, when you make download from TV, and Country setting of Auto-
Setup in plug-in, the language (“Soundtrack”/“Menus”) will be same and “Subtitle” will set to “Automatic”.
≥ Enter a code ( ➡ page 48) with the numbered buttons when you select “Other ¢¢¢¢ ”.
When the selected language is not available on the disc, the default language is played. There are discs where you can only
switch the language from the menu screen (
➡ page 22).
Soundtrack ≥ English ≥ French ≥ German ≥ Italian ≥ Spanish
≥ Original: The original language of each disc will be selected.
≥ Other ¢¢¢¢
Subtitle ≥ Automatic: If the language selected for “Soundtrack” is not
available, subtitles of that language will
automatically appear if available on that disc.
≥ English ≥ French ≥ German ≥ Italian ≥ Spanish
≥ Other ¢¢¢¢
Menus ≥ English ≥ French ≥ German ≥ Italian ≥ Spanish
≥ Other ¢¢¢¢
Ratings
Set a ratings level to limit DVD-Video play.
Follow the on-screen instructions. Enter a 4-digit password with
the numbered buttons when the password screen is shown.
≥ Do not forget your password.
≥ 8 No Limit: All DVD-Video can be played.
≥ 1 to 7: Prohibits play of DVD-Video with corresponding
ratings recorded on them.
≥ 0 Lock All: Prohibits play of all DVD-Video.
≥ Unlock Recorder ≥ Change Password
≥ Change Level ≥ Temporary Unlock
Recording time in EP mode
Select the maximum number of hours for recording in EP mode
(
➡ page 17, Recording modes and approximate recording
times).
≥ EP (6 Hour): You can record for 6 hours on an unused 4.7 GB
disc.
≥ EP (8 Hour): You can record for 8 hours on an unused 4.7 GB
disc.
DVD-Audio Video mode Playback
Select “On” to play DVD-Video content on some DVD-Audio. ≥ On: The setting returns to “Off” when you change the disc or
turn the unit off.
≥ Off
DVD-R Rec for High Speed mode
When high speed transferring (dubbing) a title to DVD-R, it is
necessary to turn this setting “On” before recording to the HDD,
however the screen size etc. is restricted (
➡ right). We
recommend turning the setting “Off” if high speed transfer
(dubbing) to DVD-R is not necessary when recording a
programme.
≥ On: Makes high speed mode transferring (dubbing) to DVD-R
possible. Press [ 2 , 1 ] to select “Yes” and press
[ENTER]. [“ ” appears in the transferring (dubbing)
list ( ➡ page 37).]
–Pictures are saved at 4:3.
–“Hybrid VBR Resolution” (
➡ below) setting is “Fixed”.
–Select the type of audio in advance from “Bilingual
Audio Selection” ( ➡ page 47).
≥ Off
Picture Comb Filter
Select the picture sharpness when recording.
The setting is fixed with “On” if you set “TV System” to “NTSC”
(
➡ page 50).
≥ On: Pictures become clear and vivid. Normally, use this
setting.
≥ Off: Select it when recording noisy pictures.
Hybrid VBR Resolution ( ➡ page 53, VBR) ≥ Automatic: The resolution is automated to provide efficient
recording with less block noise. [HDD] [RAM]
≥ Fixed: The resolution is fixed to ensure that there is no
loss of source picture resolution while recording.
Still Mode
Select the type of picture shown when you pause play
(
➡ page 53, Frames and fields).
≥ Automatic
≥ Field: Select if jittering occurs when “Automatic” is selected.
≥ Frame: Select if small text or fine patterns cannot be seen
clearly when “Automatic” is selected.
Seamless Play
Selects the play mode for play list chapter segments. ≥ On: The chapters in play lists are played seamlessly. This
does not work when there are several audio types
included on the play list and when using Quick View.
Additionally, the positioning of chapter segments may
change slightly.
≥ Off: The points where chapters in play lists change are played
accurately, but the picture may freeze for a moment.
AV-in NR
Reduces video tape noise while transferring (dubbing). ≥ On: Noise reduction works for input video.
≥ Off: Noise reduction is off. Select when you want to record
input as is.
46
7463en.book Page 46 Tuesday, March 8, 2005 11:07 AM