Panasonic DMRE95H - Manual (Page 20)

20
RQT7463
Reco
rd
in
g
Timer recording
Refer to the control reference on page 19.
[HDD] [RAM] [DVD-R]
You can enter up to 32 programmes up to a month in advance.
(Each daily or weekly programme is counted as one programme.)
1
Press [PROG/CHECK].
2
Press [ 3 , 4 ] to select “New Timer
Programme” and press [ENTER].
3
Press [ 1 ] to move through the items
and change the items with [ 3 , 4 ].
≥ Press and hold [ 3 , 4 ] to alter the Start (Start time) and
Stop (Finish time) in 30-minute increments.
≥ You can also set Name (Programme position/TV Station
Name), Date, Start (Start time), and Stop (Finish time) with
the numbered buttons.
≥ You can also press [REC MODE] to change the recording
mode.
≥ Date
≥ VPS/PDC ( ➡ page 19)
ON !) OFF (– – –)
≥ You can also press [HDD] or [DVD] to select the recording
drive.
When the recording drive is “DVD” and there is not enough
remaining space, recording automatically switches to the
“HDD” (
➡ page 19, Relief Recording).
≥ RENEW (Auto Renewal Recording) [HDD] ( ➡ right)
ON !) OFF
≥ Programme Name ( ➡ page 44)
Press [ 2 , 1 ] to select “Programme Name” and press
[ENTER].
4
Press [ENTER].
Repeat steps 2–4 to programme other recordings.
5
Press [ F TIMER].
“ F ” lights on the unit’s display to indicate timer recording
standby has been activated.
≥ The message screen
appears. Only play is
possible while timer
recording is in standby (
➡ page 22, 23). (You cannot play a
title recorded using a different encoding system from that of
the TV system currently selected on the unit.)
≥ The unit is not off. To save power, turn the unit off by
pressing [ Í DVD].
[HDD]
If you record a programme onto HDD repeatedly everyday or every
week using timer recording, the unit will record the new programme
over the old one.
This function can be used only when weekly recording or daily
recording is selected.
1
Press [PROG/CHECK].
2
Press [ 3 , 4 ] to select the programme
and press [ENTER].
3
Press [ 2 , 1 ] to select “RENEW”
column.
4
Press [ 3 , 4 ] to select “ON” and press
[ENTER].
[Note]
≥ If a programme set for Auto Renewal Recording is protected or
while play back is taking place from the HDD, or while transferring
(dubbing), the programme will not be overwritten. Instead the
programme set for recording will be saved as a separate
programme, and this programme will be the one to be overwritten
when the next Auto Renewal Recording takes place.
≥ Play lists made from programmes that were set for Auto Renewal
Recording are erased along with auto renewal.
≥ When there is not enough space on the HDD, the programme may
not be recorded completely.
Manually programming timer
recordings
[.
l
l
l
a.
Date: Current date up to one month later minus
one day
;:
Daily timer: SUN-SAT > MON-SAT > MON-FRI
;:
Weekly timer: SUN > --- > SAT
New Timer Programme
SELECT
ENTER RETURN
Press ENTER to store
new programme.
Mode Disc space Stop Start No. Name Date
TIMER
RECORDING
12:56:00 15. 7. TUE
VPS
PDC
HDD
DVD
1:58 SP DVD 30:24 SP Remain HDD
SP OK 20:00 19:00 ARD 15/ 7 TUE 01 OFF
TIMER
RECORDING
12:57:00 15. 7. TUE
Programme Name
Mode Stop Start Name Date
VPS
PDC
HDD
DVD
22:30 22:00 15/ 7 TUE OFF HDD 1 ARD
1:58 SP DVD 30:24 SP Remain HDD
SP
Mode Disc space Stop Start No. Name Date
TIMER
RECORDING
12:58:00 15. 7. TUE
New Timer Programme
VPS
PDC
HDD
DVD
1:58 SP DVD 30:24 SP Remain HDD
SP OK 20:00 19:00 ARD 15/ 7 TUE 01 OFF
SP OK 22:30 22:00 ARD 15/ 7 TUE 02 OFF
Check to make sure “OK”
is displayed (
➡ page 21).
Timer standby is active. Playback is possible.
∫ To release the unit from recording standby
Press [ F TIMER].
“ F ” goes out.
≥ Be sure to press [ F TIMER] before the programme start time to
put the unit on recording standby. Timer recording will work only
if “
F ” is displayed.
∫ To cancel recording when recording has
already begun
Press [ F TIMER].
≥ You can also press and hold [ ∫ ] on the main unit for more than
3 seconds to stop recording.
[Note]
≥ Timer recordings are activated regardless of whether the unit is
turned on/off.
≥ Timer recordings begin when the set time is reached even
when playing.
≥ Timer recordings do not begin while editing or transferring
(dubbing) in normal speed mode ( ➡ page 35).
≥ “ F ” flashes for about 5 seconds when the unit cannot go to
timer recording standby.
≥ If the unit is not put in the timer recording standby mode at the
latest 10 minutes before the programmed timer recording
starting time, the “
F ” flashes on the unit display. In this case,
press [ F TIMER] to put the unit in the timer recording standby
mode.
≥ When you programme successive timer recordings to start
immediately one after the other, the unit cannot record the part
at the beginning of the later programmes (a few seconds when
recording with HDD or DVD-RAM and approximately 30
seconds when recording with DVD-R).
Auto Renewal Recording
TIMER
RECORDING
12:57:00 15. 7. TUE
Programme Name
Mode RENEW Stop Start Name Date
VPS
PDC
HDD
DVD
1:58 SP DVD 30:24 SP Remain HDD
22:30 22:00 TUE OFF HDD 1 ARD SP ON
20
7463en.book Page 20 Tuesday, March 8, 2005 11:07 AM