Panasonic DMRE95H User Manual
Page 18
18
RQT7463
Reco
rd
in
g
Recording television programmes
Refer to the control reference on page 16.
[HDD]
[RAM]
[DVD-R]
The unit sets the best possible picture quality that fits the recording
within the remaining disc space. The recording mode becomes FR
mode.
e.g.,
Preparation
Select the channel to record.
1
While stopped
Press [FUNCTIONS].
2
Press [
3
,
4
,
2
,
1
] to select
“FLEXIBLE REC” and press [ENTER].
3
Press [
2
,
1
] to select “Hour” and
“Min.” and press [
3
,
4
] to set the
recording time.
≥
You cannot record more than 8 hours.
≥
You can also set the recording time with the numbered
buttons.
4
When you want to start recording
Press [
3
,
4
,
2
,
1
] to select “Start”
and press [ENTER].
Recording starts.
To exit the screen without recording
Press [RETURN].
To stop recording partway
Press [
∫
].
To show the remaining time
Press [STATUS].
When connected to a television that has the Q Link
function using a fully wired 21-pin Scart cable.
This function allows you to immediately start recording the
programme that you are viewing on the TV.
1
Press [HDD] or [DVD] to select the
recording drive.
The HDD or DVD indicator lights up on the unit.
2
If you selected the DVD drive
Insert a disc. (
➡
page 16)
3
Press [
¥
DIRECT TV REC].
Recording starts.
To stop recording
Press [
∫
].
Preparation
≥
Connect a satellite/digital receiver or decoder to this unit’s input
terminals (
➡
page 9).
≥
When recording bilingual programmes
[HDD]
[RAM]
When both M 1 and M 2 is selected on the connected equipment,
you can select the audio type in playback.
[DVD-R]
Select either M 1 or M 2 on the connected equipment. (You cannot
select the audio type in playback.)
≥
When the output signal from the external equipment is NTSC,
change the “TV System” to “NTSC” in the SETUP menu
(
➡
page 50).
≥
Press [HDD] or [DVD] to select the recording drive.
1
While stopped
Press [INPUT SELECT] to select the
input channel for the equipment you
have connected.
e.g., If you have connected to AV2 input terminals, select
“AV2”.
2
Press [REC MODE] to select the
recording mode.
3
Select the channel on the other
equipment.
4
Press [
¥
REC].
Recording starts.
To skip unwanted parts
Press [
;
] to pause recording. (Press again to restart recording.)
To stop recording
Press [
∫
].
Flexible Recording
Remain
45 minutes in
SP mode
60 minutes
Recorded
Perfectly fit!
Recording rate
between SP and LP
Programme to be recorded
FLEXIBLE REC
Start
Cancel
Recording in FR mode
Set rec. time
3 Hour 00 Min.
Maximum rec. time
3 Hour 00 Min.
SELECT
RETURN
ARD
L R
DVD-RAM
REC 59
Remaining
time
Direct TV Recording
Recording from satellite/digital receiver
or decoder
18
7463en.book Page 18 Tuesday, March 8, 2005 11:07 AM