Panasonic DMRE95H - Manual (Page 29)

29
RQT7463
P
la
y
ing ba
c
k
This function works only when the elapsed play time is displayed.
§ Only when you have set “Progressive” to “On” in the SETUP menu
(
➡ page 12).
Status messages appear on the television when you operate the unit
to show the condition of the unit.
Press [STATUS].
The display changes each time you press the button.
≥ Displayed information are examples.
≥ TV audio type
STEREO: STEREO/NICAM stereo broadcast
M 1/M 2:
Bilingual/NICAM dual-sound broadcast
M 1: NICAM monaural broadcast
Play menu—Change the play sequence
Repeat Play
≥ All
≥ Chapter
≥ Group
≥ PL (Play list)
≥ Title
≥ Track
[VCD] [CD] (excluding MP3 discs)
[HDD] [RAM] [DVD-R] [DVD-V]
[DVD-A] [CD] (MP3 discs only)
[HDD] [RAM]
[HDD] [RAM] [DVD-R] [DVD-V]
[DVD-A] [VCD] [CD]
Select “OFF” to cancel.
Picture menu—Change the picture quality
Playback NR
Reduces noise and picture degradation.
Progressive § ( ➡ page 53)
Select “ON” to enable progressive output.
Select “OFF” if the picture is stretched horizontally.
Transfer § [When “Progressive” ( ➡ above) is set to “ON”.]
Select the method of conversion for progressive output to suit
the type of material being played (
➡ page 53, Film and video).
When the output signal is PAL
≥ Auto
≥ Video:
Detects 25 frame-per-second film content and
appropriately converts it.
Select when using “Auto”, and the video
content is distorted.
When the output signal is NTSC
≥ Auto1
(normal):
≥ Auto2:
≥ Video:
Detects 24 frame-per-second film content and
appropriately converts it.
Compatible with 30 frame-per-second film
content in addition to 24 frame-per-second
film content. (Picture distortion may occur
depending on the content)
Select when using “Auto1” and “Auto2”, and
the video content is distorted.
Sound menu—Change the sound effect
V.S.S. [HDD] [RAM] [DVD-R] [DVD-V]
(Dolby Digital, MPEG, 2-channel or over only)
Enjoy a surround-like effect if you are using two front speakers
only.
≥ Turn V.S.S. off if it causes distortion.
≥ V.S.S. does not work for bilingual recordings.
Dialog Enhancer [DVD-A] [DVD-V]
(Dolby Digital, 3-channel or over only, including a centre channel)
The volume of the centre channel is raised to make dialogue
easier to hear.
Status messages
13:50 XP 18:53:50 11.10.
π T2 0:05.14 XP
π T1 0:00.10 SP
Remain π
REC
PLAY
STEREO
L R
DVD REC
HDD
Selected drive/type of disc
TV audio type being received ( ➡ below)
Recording or play status/input channel
Selected audio type
Available recording time and
recording mode
Play position within the title
Title number and elapsed time during play/
Recording mode
Date and time
No display
Recording drive/
Transfer (dubbing) progress indicator
Used HDD
space
Title number and elapsed time during
recording/Recording mode
29
7463en.book Page 29 Tuesday, March 8, 2005 11:07 AM