Panasonic DMRE95H - Manual (Page 59)

59
RQT7463
Re
fe
re
n
c
e
Recording, timer recording and transferring (dubbing) (Continued) Page
Play
Timer recording does not stop
even when [
∫ ] is pressed.
≥ While using timer recording, press [ F TIMER]. (“ F ” disappears.)
≥ When using the linked timer recording with external equipment, press [EXT LINK]. (“Ext
Link” disappears.)
19, 20
21
The timer programme remains
even after recording finishes. ≥ The timer programme remains if set to daily or weekly. 20
A part or whole of a recorded
title has been lost. ≥ If there is a power failure or the plug is disconnected from the household AC mains socket
while recording or editing, the title may be lost or the disc may become unusable.
You will have to format the disc (
[HDD] [RAM] ) or use a new disc. We cannot offer any
guarantee regarding lost programmes or discs.
—
Cannot transfer (dub) to a
DVD-R disc using the high
speed mode. ≥ When recording to the HDD, set “DVD-R Rec for High Speed mode” to “On” in the SETUP
menu. 46
When transferring (dubbing),
it takes a long time even when
high speed mode is selected. ≥ Use a disc that is compatible with high speed recording. Even if the disc is high speed
recording compatible, the maximum speed recording rating may not be possible due to the
condition of the disc.
≥ It takes longer than normal to transfer (dub) many titles.
≥ You cannot high speed transfer (dub) to DVD-R titles longer than 6 hours when using other
Panasonic DVD recorders that are not compatible with EP (8 hour) mode recording.
—
—
—
An unusually loud sound is
coming from the rotating DVD-R. ≥ When recording or high speed transferring (dubbing) to a DVD-R, the sound of the disc
rotating may be louder than normal, however, this is not a problem. —
The DV automatic recording
function does not work. ≥ If images cannot be recorded or if the recording is aborted, check the connections and DV
equipment settings.
≥ You cannot start recording until the images from the DV equipment appear on the television.
≥ Recording may not be performed as desired if the time codes on the tape in the DV
equipment are not successive.
≥ Depending on the equipment, the DV automatic recording may not operate properly.
39
—
—
—
Play fails to start even when
[
1 ] (PLAY) is pressed.
Play starts but then stops
immediately.
≥ Insert the disc correctly with the label facing up.
≥ You tried to play a blank DVD-RAM/DVD-R, or disc unplayable on this unit.
≥ You may be able to transfer (dub) a “One time only recording” title that was recorded to
DVD-RAM using a different Panasonic DVD Recorder to this unit’s HDD, but play is not
possible due to copyright protection.
≥ When recording to DVD-RAM using “EP (8 Hour)” mode, play may not be possible on DVD
players that are compatible with DVD-RAM. In this case use “EP (6 Hour)” mode.
≥ You cannot play discs during DV automatic recording.
22
14
—
46
—
Audio and video momentarily
pause. ≥ This occurs between play list chapters.
≥ This occurs between chapters and with partially deleted titles on finalized DVD-R that have
been transferred (dubbed) using the high speed mode.
—
—
DVD-Video is not played. ≥ Some DVD-Video cannot be played when you change the ratings level. 46
Alternative soundtrack and
subtitles cannot be selected. ≥ The languages are not recorded on the disc.
≥ You may have to use the disc’s menus to select languages.
—
—
No subtitles. ≥ Subtitles are not recorded on the disc.
≥ Turn the subtitles on.
—
28
Angle cannot be changed. ≥ Angles can only be changed during scenes where different angles are recorded. —
You have forgotten your
ratings password. ≥ While the disc tray is open, press [DVD] then press and hold [ D ] and [ E ] on
the main unit at the same time for 5 or more seconds.
—
Quick View does not work. ≥ This does not work if the setting is “Off” in “PLAY k 1.3 & Audio during Search”.
≥ This does not work when audio is other than Dolby Digital.
≥ This does not work when recording is in XP or FR mode. [RAM]
47
—
—
The resume play function
does not work. ≥ This function only works when the indicator on the right appears on the unit
display.
≥ Memorized positions are canceled when the unit is turned off or when the
tray is opened. The memorized position on the play list is also canceled
when the play list and title are edited.
—
—
The Video CD picture does not
display properly. ≥ When connecting to Multi-system TV, select “NTSC” in “TV System” in the SETUP menu.
≥ When connecting to PAL TV, the lower part of the picture cannot be displayed correctly
during search.
50
—
Time Slip does not work. ≥ Time Slip does not work when the unit’s “TV System” settings are different from the title
recorded on the disc. 50
HDD
EXT EXT EXT Link Link Link
XP XP XP
SP
LP LP LP
EP EP EP
REC REC REC PLAY PLAY PLAY
59
7463en.book Page 59 Tuesday, March 8, 2005 11:07 AM