Panasonic DMRE95H - Manual (Page 19)

19
RQT7463
Reco
rd
in
g
Timer recording
[HDD] [RAM] [DVD-R]
You can enter up to 32 programmes up to a month in advance.
Entering S HOW V IEW numbers is an easy way of timer recording. You
can find these numbers in TV listings in newspapers and magazines.
1
Press [ShowView].
2
Press the numbered buttons to enter
the S
HOW V IEW number.
Press [ 2 ] to move back to correct a digit.
3
Press [ENTER].
≥ Confirm the programme and make corrections if necessary
using [
3 , 4 , 2 , 1 ] ( ➡ page 20, step 3).
≥ When “-- ---” appears in the “Name” column, you cannot set
timer recording. Press [
3 , 4 ] to select desired programme
position. After you have entered the information of a TV
station, it is kept in the unit’s memory.
≥ You can also press [REC MODE] to change the recording
mode.
≥ VPS/PDC ( ➡ right)
ON !) OFF (– – –)
≥ You can also press [HDD] or [DVD] to select the recording
drive.
When the recording drive is “DVD” and there is not enough
remaining space, recording automatically switches to the
“HDD” (
➡ right, Relief Recording).
≥ RENEW (Auto Renewal Recording) [HDD] ( ➡ page 20)
ON !) OFF
≥ Programme Name
Press [
2 , 1 ] to select “Programme Name” and press
[ENTER] ( ➡ page 44).
4
Press [ENTER].
The settings are stored.
Repeat steps 1–4 to programme other recordings.
5
Press [ F TIMER].
“ F ” lights on the unit’s display to indicate timer recording
standby has been activated.
≥ The message screen
appears. Only play is
possible while timer
recording is in standby (
➡ page 22, 23). (You cannot play a
title recorded using a different encoding system from that of
the TV system currently selected on the unit.)
≥ The unit is not off. To save power, turn the unit off by
pressing [ Í DVD].
Using S HOW V IEW number to make timer
recordings
VOLUME CH DIRECT TV REC
DVD
TV
AV
1 2 3
4 5 6
7 8
0
9
MANUAL SKIP
ShowView
CH
CANCEL INPUT SELECT
SKIP
STOP PAUSE PLAY/x1.3
SLOW/SEARCH
FUNCTIONS
ENTER
DIRECT NAVIGATOR
TOP MENU
RETURN SUB MENU
CREATE
CHAPTER
TIMER
EXT LINK
PROG/CHECK
REC MODE ERASE REC
AUDIO
TIME SLIP STATUS DISPLAY
F
A B C
DUBBING
HDD DVD SD/PC
3 , 4,2 , 1
ENTER
F TIMER
PROG/CHECK
EXT LINK
REC MODE
ShowView
HDD, DVD
¢ CANCEL
Í DVD
Numbered
buttons
ShowView 1:58 SP DVD 30:24 SP Remain HDD
12:53:00 15. 7. TUE
Enter ShowView Number by using 0-9 key.
TIMER
RECORDING
12:54:00 15. 7. TUE
Programme Name
Mode Stop Start Name Date
VPS
PDC
HDD
DVD
20:00 19:00 15/ 7 TUE SP OFF HDD 1 ARD
1:58 SP DVD 30:24 SP Remain HDD
∫ To release the unit from recording standby
Press [ F TIMER].
“ F ” goes out.
≥ Be sure to press [ F TIMER] before the programme start time to
put the unit on recording standby. Timer recording will work only
if “
F ” is displayed.
∫ To cancel recording when recording has
already begun
Press [ F TIMER].
≥ You can also press and hold [ ∫ ] on the main unit for more than
3 seconds to stop recording.
[Note]
≥ Timer recordings are activated regardless of whether the unit is
turned on/off.
≥ Timer recordings begin when the set time is reached even
when playing.
≥ Timer recordings do not begin while editing or transferring
(dubbing) in normal speed mode ( ➡ page 35).
≥ “ F ” flashes for about 5 seconds when the unit cannot go to
timer recording standby.
≥ If the unit is not put in the timer recording standby mode at the
latest 10 minutes before the programmed timer recording
starting time, the “
F ” flashes on the unit display. In this case,
press [ F TIMER] to put the unit in the timer recording standby
mode.
≥ When you programme successive timer recordings to start
immediately one after the other, the unit cannot record the part
at the beginning of the later programmes (a few seconds when
recording with HDD or DVD-RAM and approximately 30
seconds when recording with DVD-R).
∫ VPS/PDC function ( ➡ page 54)
As long as a VPS/PDC signal is being broadcast by the TV
station, even if the broadcast programme time changes, the
recording time automatically changes to match the new
broadcast time.
To activate the VPS/PDC function
In step 3 in the VPS/PDC column, press [
3 , 4 ] to select “ON”.
∫ Relief Recording
When the recording drive is set to “DVD” for timer recording and
if the programme will not fit onto the disc, the recording drive will
be altered to the “HDD” automatically.
≥ If there is no disc in the tray or the disc cannot be recorded on
or when timer recording starts while transferring (dubbing), the
recording drive will be altered to the HDD.
≥ The Direct Navigator shows which programmes were relief-
recorded (“ ” is displayed.) ( ➡ page 22).
≥ If the time remaining on the HDD is insufficient, as much of the
programme as possible will be recorded onto the HDD.
≥ Relief recording is not activated when recording the programme
with VPS/PDC and it is extended so that it no longer fits on the
disc.
SP OK 20:00 19:00 ARD 15/ 7 TUE 01
Mode Disc space Stop Start No. Name Date
TIMER
RECORDING
12:55:00 15. 7. TUE
New Timer Programme
OFF
VPS
PDC
HDD
DVD
1:58 SP DVD 30:24 SP Remain HDD
Check to make sure “OK”
is displayed (
➡ page 21).
Timer standby is active. Playback is possible.
19
7463en.book Page 19 Tuesday, March 8, 2005 11:07 AM