Battery installation & charging – AT&T E1828B User Manual

Page 10

Advertising
background image

7

Getting started

BATTERY LOW

10:08

AM

02/14

NEEDS RECHARGING

then

1. Plug the small end of

the smaller power adapter

into the jack on the under-

side of the charger, then

route the cord through the

slot as shown.

Battery installation & charging

After installing the battery, you may be able to make or receive short calls. For

best performance, place the handset in charger to charge for 16 hours before

use.
You can keep the battery charged by returning the handset to charger after use.

When the battery is fully depleted, a recharge takes about 12 hours. The average

talk time on a fully charged battery is about eight hours, and the standby time is

approximately three days. Actual battery life depends on usage conditions and

age of battery.

3. Insert the plug as indi-

cated. Be sure to securely

insert the plug, making

sure matches the color-

coded label inside the

battery compartment.

6. You may be able to make or receive

short calls. For best performance, place

the handset in charger to charge for at

least 16 hours before first use.

Battery low indicator

Return the handset to the

charger to recharge when this

symbol flashes and the hand-

set beeps or when the hand-

set screen displays NEEDS

RECHARGING.

2. Plug the large

end of the smaller

power adapter into

an electrical outlet

not controlled by a

wall switch.

5. Slide the bat-

tery compart-

ment cover up

until it clicks.

4. Place the bat-

tery and wires

inside the com-

partment.

To replace the battery,

press in and downward

on the tab of the bat-

tery compartment to

open the battery com-

partment cover. Lift

out the old battery

and disconnect it from

the handset. Follow

the instructions on

this page to install and

charge the new battery.

NOTE: Under normal conditions, the

battery should last around one year. This

may vary depending on usage.

Caution: Use only the supplied rechargeable battery or replacement battery 2422 (SKU 23402,

part number 89-0047-00-00) or equivalent. To order a replacement battery, visit our website at www.

telephones.att.com or call 1 (800) 222-3111. In Canada dial 1 (866) 288-4268.

-- 1 --

Advertising