AT&T E1828B - Manual (Page 38)

35
Caller ID operation
Caller ID memory
• Press SELECT/ TRANSFER on cordless handset or
SELECT on telephone base to edit the telephone
number. You can make any changes to the num-
ber by using the CID then
INTERCOM
/CID DEL
on telephone base and
INT/
DELETE on cordless
handset to erase characters, or using the dial pad
to enter new ones (see pages 26-27 for instruc-
tions).
• Press SELECT/
TRANSFER
on cordless handset or
SELECT on telephone base. You can now choose
to assign a distinctive ring to this entry. Press
CID or DIR to choose Y (for yes) or N (for
no). If you choose Yes (and if you have caller
ID service), a different ringing style will alert
you when this person calls (This step is for the
cordless handset only).
• Press SELECT/
TRANSFER
on cordless handset
or SELECT on telephone base again and a long
beep sound signals that the information has
been stored in the directory.
Deleting a number from the call log
• Press CID on the telephone base or on the
cordless handset to activate the call log.
• Press CID or DIR on the telephone base or
on the cordless handset to scroll to the incom-
ing call entry to be deleted.
• When the desired record is displayed on the
screen, press INTERCOM /CID DEL on the tele-
phone base ( INT/ DELETE on the cordless hand-
set) to delete the entry.
NOTES:
1. Deleting an incoming call record on the telephone base does
not automatically delete the same record from the cordless
handset. Likewise, deleting an incoming call record on the
cordless handset does not automatically delete the same
record from the telephone base.
2. When an entry is deleted, the next oldest record is displayed.
3. See page 34 for instructions on dialing a call log entry.