AT&T E1828B - Manual (Page 37)

34
Caller ID operation
Caller ID memory
Dialing from the call log
• Press CID on the telephone base or on the
cordless handset to activate the call log.
• Press CID or DIR on the telephone base or
on the cordless handset to scroll to the desired
number to be dialed.
• Press DISP DIAL below the screen on the tele-
phone base or press PHONE/
FLASH
on the
cordless handset to contact the person whose
name is displayed on the screen.
Storing a record from the call log into the directory
• Press CID on the telephone base or on the
cordless handset to activate the call log.
• Press CID or DIR on the telephone base or
on the cordless handset to scroll to the caller
entry to be stored in the directory.
• When the desired entry is displayed, press
SELECT/
TRANSFER
on cordless handset or
SELECT on telephone base.
• When the options DIAL and PROGRAM
appear on the screen with the word PROGRAM
flashing, press SELECT/
TRANSFER
on cordless
handset or SELECT on telephone base
• The cursor will flash on the first letter of the top
row. If it is necessary to edit the name before
entering it into the directory, use the CID on
both cordless handset and telephone base then
use
INTERCOM /CID DEL on telephone base or
INT/ DELETE on the cordless handset to delete
existing characters, or use the keypad to make
changes to the name to be used in the directory
(page 26).
NOTES:
1. When there is an unanswered
call, the screen on the cordless
handset and the telephone base
will show the number of missed
call.
2. When only some of the missed
calls have been reviewed, the
screen on the telephone base or
cordless handset will continue to
show the remaining number of
unreviewed calls.