AT&T E1828B - Manual (Page 27)

24
Telephone operation
Speed dialing (cordless handset only)
On the cordless handset, numbers called most fre-
quently can be stored in so that they can be dialed
with only two button presses.
You can enter nine speed dial numbers up to 24
digits. Each entry is associated with a dial pad
numeral key.
The nine speed dial numbers on the cordless
handset will be automatically added to the hand-
set directory. You can easily dial these telephone
numbers by pressing and holding a dial pad key
and then pressing PHONE/
FLASH
.
You can also make existing directory entries to
speed dial entries.
To create a speed dial entry
• Press MENU/
CHAN
to begin programming.
• Press CID/-VOLUME or DIR /VOLUME+ until
the screen displays SPEED DIAL .
• Press SELECT/ TRANSFER .
• Press a number key on the dial pad to choose
a memory location (1-9).
• Enter a name (up to 15 characters), then press
SELECT/
TRANSFER
(see page 26 for instructions
on name entry).
• Enter a telephone number (up to 24 digits), then
press SELECT/
TRANSFER
.
• Choose distinctive ringing (yes or no) by press-
ing CID/-VOLUME or DIR /VOLUME+ (see
page 27 for information about distinctive ring).
• Press MENU/ CHAN or SELECT/ TRANSFER to store
the number. You will hear a confirmation tone.
NOTE: The speed dial fea-
ture occupies up to nine of the
thirty memory locations in the
directory. For example, if there
are only five speed dial entries,
then up to 25 entries can be
stored in the directory. If there
are already 30 entries in the
directory, no new directory and
speed dial entries can be stored
in memory until some of the
existing ones are deleted.
1. MENU/
CHAN
2. DIR
3. SELECT/
TRANSFER
(pages 24-25).
4.
NOTE: You can convert any
directory entry into speed dial
entry (page 29).
DIRECTORY
SPEED DIAL
ENTER 1-9
ENTER 1-9
ENTER NAME