Panasonic HD Writer 2.0E User Manual
Page 16
16
Available Cards/Discs/Files
Introduction
recording software is running, start recording with this
software.)
- Connection cables for a PC or DVD device are inserted or
removed, or the power is turned on or off.
- This software is forcibly closed.
- When using an external DVD drive, do not remove or
insert the connection cable while data is being recorded.
Doing so may cause the software to malfunction or corrupt
the data.
∫
Playback and use of produced discs
• Created discs in AVCHD standard cannot be accessed with
software that does not support the AVCHD standard. (Since a
disc where the data are recorded in AVCHD standard is
recorded in UDF 2.5 format, files on the disc cannot be
displayed with Windows
®
Explorer in an environment that
does not support the UDF 2.5 format.)
• For DVD-R discs with dual layer on single side, images may be
frozen or sounds may be inaudible for a moment when shifting
from the first layer to the second layer, depending on the
player.
• Do not delete or revise the folders on the discs and the files in
the folders. The data may not play back.
• To copy the image data on an SD card or to record data on
an SD card, a video camera or an SD card reader/writer
that can read and record on an SD card are required. (For
an SDHC memory card (4 GB to 8 GB), a device
supporting the SDHC will be required.)
(For the operation method, refer to the operating
instructions for each device.)
• Use a video camera supported by this software
to
initialize (format) SD cards
.
(For methods of formatting SD
cards, refer to the operating instructions of the video
camera.)
• If the write-protect switch has been set to [LOCK],
recording is not possible.
• Do not delete or revise the folders on the produced cards and
the files in the folders. The data may not play back.
Notes on use of SD cards
ENG-HDW20.book 16 ページ ２００７年６月２９日 金曜日 午後１時４０分