Panasonic HD Writer 2.0E User Manual
Page 97
97
When a problem occurs
Settings/Convenient information
Editing image data
When the following problem occurs
Confirm the following
Images do not play back properly.
z
Close any other software that is running.
z
Update the device driver for the sound card and/or video card.
z
Depending on the throughput of the PC, playback may be jerky due to a reduced frame
rate.
Voice is not audible.
z
For Windows Vista
TM
: From the start menu, select [Control Panel] >> [Hardware and
Sound] >> [Sound] >> [Speakers], and then click [Properties]. Confirm that [Use this
device (enable)] is selected in [Device usage] on the [General] tab or that [Speakers]
and [Line input] are not muted on the [Levels] tab.
z
For Windows
®
XP/2000: Confirm that [Volume Control] and [Line input] are not muted in
[Volume Control] window of the PC.
z
Voice will not play back while the image is paused.
Image data cannot be edited.
z
When a top menu is attached to the image data, the image data cannot be edited. If an
image data with an attached top menu is edited, discrepancies may occur between the
top menu and the actual data. Thus, the top menu must be deleted before editing with
this software.
A new top menu can be added after editing, but the deleted top menu will not be retained.
In order to retain the original data, copy the image data before editing.
When a scene is split, a thumbnail that
differs from the image at the split point
is displayed.
z
Since editing accuracy is about 0.5 seconds, a thumbnail that differs from the image at
the split point may be produced, but it is not a malfunction.
When a scene is deleted, an error
message indicates that the capacity is
not sufficient.
z
If the deleted scene is a part of a video (file), a copy of the remaining part (scenes) will
be produced first, and then the original file will be deleted. Thus, some free space for
copying data temporarily is required, and it takes time.
ENG-HDW20.book 97 ページ ２００７年６月２９日 金曜日 午後１時４０分