Panasonic HD Writer 2.0E - Manual (Page 86)

86
Detailed settings for the respective functions
Settings/Convenient information
Adjust the settings related to the DVD drive.
1. [Select the default DVD burner]
Click [ ] to select a drive that is set as the destination
in the initial setting for recording or copying to a DVD
disc.
2. [Choose the disc writing speed]
Recording speed for a DVD disc can be changed.
[Maximum] is the initial setting; however, if the
recording fails, select [Standard]. (This may correct the
problem.)
• [Maximum] is selected in the initial setting.
3. [Auto Protect setting for DVD-RAM/RW]
When [Auto Protect ON] is selected, the protection
setting will be cleared temporarily when data is
recorded in AVCHD standard onto a DVD disc that is
protected in the AVCHD standard. (The protection
setting will be turned on when the DVD disc is ejected.)
Even a DVD disc that has been initialized or formatted,
which is not protected, will become a protected DVD
disc when it is ejected after recording data.
If [Auto Protect OFF] is selected, recording, etc. to
protected DVD discs is not possible.
Tip
z Since DVD-RW discs or DVD-RAM discs recorded in the
[Auto Protect ON] state are protected, they may not be
initialized or formatted with other DVD recording software
or Windows
® Explorer.
In this case, by formatting discs ( l 90) (quick format *1 )
using the format function of this software, the protect
setting is cleared for initialization and formatting with
recording software or Windows
® Explorer.
*1: Since standard formatting takes a long time, using quick format is
recommended.
[Drive settings] panel
1
2
3
ENG-HDW20.book 86 ページ ２００７年６月２９日 金曜日 午後１時４０分