Panasonic HD Writer 2.0E User Manual
Page 72
72
Output images in MPEG2 format
Easy edit
Edit image data
4.
Click [Output the file] button.
5.
When the confirmation message is displayed, click
[OK].
Output in MPEG2 format will start.
• Click [Cancel] to cancel outputting image data.
6.
When the save completion message is displayed,
click [OK].
7.
To proceed to open the folder with the saved MPEG2
file, click [Yes].
Tip
z
For images output in MPEG2 format, the aspect ratio is
16:9 and audio is 5.1ch. Note that these images cannot be
copied and may not play back properly or reflect the
editing when using software that does not support this
format.
z
Video consisting of both 5.1ch-sound scene and
2ch-sound scene cannot be output in MPEG2 format. (The
number of channels can be confirmed in the [Properties]
window.)
z
An MPEG2 file cannot be recorded on media with this
software. To do this, use DVD-Video creation software.
(Create a DVD-Video with this software by recording
images on the hard disk (in AVCHD format) in DVD-Video
format
ENG-HDW20.book 72 ページ ２００７年６月２９日 金曜日 午後１時４０分