Panasonic HD Writer 2.0E - Manual (Page 40)

40
Copy data between a card and a disc
Copy
4.
When the confirmation message is displayed, click
[Yes].
• If [No] is clicked, the display returns to the Copy
window.
• Pictures cannot be copied to a DVD disc. Therefore,
the following message will be displayed if you try to
copy image data including pictures to a DVD disc.
Click [OK] to continue.
5.
Copy progress is indicated by the progress bar.
• Click [Cancel] to stop copying midway through. (All the
data that has been copied will be deleted.)
However copying cannot be stopped on DVD-R discs
and DVD-RW discs.
• It takes time to copy all the data. Do not operate the
PC until the copy process is completed.
6.
Once the copy process is completed, the following
message is displayed. Then click [OK].
7.
Click [OK].
Exit the Copy window and return to the [Start Menu]
window.
Tip
z If the DVD-RW discs and DVD-RAM discs are protected,
data cannot be copied to the discs. Clear the settings by
using the device that write protected the disc or enable the
[Auto Protect] settings
( l 86) . (No protect function is
necessary on a DVD-R disc, which is write-once only.)
z Data cannot be copied between the same kinds of media,
for instance from an SD card to an SD card or from a DVD
disc to another DVD disc.
ENG-HDW20.book 40 ページ ２００７年６月２９日 金曜日 午後１時４０分