Panasonic -eng User Manual
Page 100
100
When a problem occurs - Editing image data -
Settings/Convenient information
Editing image data
When the following problem occurs
Confirm the following
Images do not play back properly.
z Close any other software that is running.
z Update the device driver for the sound card or video card.
z Depending on the throughput of the PC, playback may be jerky due to a reduced frame
rate.
Voice is not audible.
z For Windows Vista
®
: From the start menu, select [Control Panel] >> [Hardware and
Sound] >> [Sound] >> [Speakers], and then click [Properties]. Confirm that [Use this
device (enable)] is selected in [Device usage] on the [General] tab or that [Speakers]
and [Line input] are not muted on the [Levels] tab.
z For Windows
®
XP/2000: Confirm that [Volume Control] and [Line input] are not muted in
[Volume Control] window of the PC.
z Voice will not play back while the image is paused.
Image data cannot be edited.
z When a top menu is attached to the image data, the image data cannot be edited. If an
image data with an attached top menu is edited, discrepancies may occur between the
top menu and the actual data. Thus, the top menu must be deleted before editing with
this software.
A new top menu can be added after editing, but the deleted top menu will not be
retained. In order to retain the original data, copy the image data before editing.
When a scene is split, a thumbnail that
differs from the image at the split point
is displayed.
z Since editing accuracy is about 0.5 seconds, a thumbnail that differs from the image at
the split point may be produced, but it is not a malfunction.
HDWriter25_eng.book 100 ページ ２００７年１２月２６日 水曜日 午後５時４７分