Panasonic -eng - Manual (Page 36)

36
Copy from the media to a PC
Copy
1
Click [Copy to PC] button on the [Start Menu]
window that is displayed when starting HD Writer.
2
When the Copy window (for details: l32 ) opens,
set the contents.
1 Click [ ] button to select a media as the copy source.
• If the drive is not displayed after replacing the media,
click [Refresh] button.
2 If there are any videos or picture folders you do not want
to copy, click them to clear the selections.
3 Specify the copy destination.
Select the storage folder in the upper column. Enter the
name of the copy destination folder, which is created in
the storage folder, in the lower column.
• How to register a new folder as the storage folder:
l11
• A name that already exists cannot be used as the
name of the copy destination folder.
3
Click [Start copying] button.
• When the [Return to Start Menu] button is clicked, the
Copy window closes and the display returns to the [Start
Menu] window. (The data is not copied at this time.)
• If conditions to start copying are not satisfied, such as
when not selecting any videos or picture folders, you
cannot click this button. Confirm the information display.
4
When the confirmation message is displayed, click
[Yes].
• If [No] is clicked, the display returns to the Copy window.
5
Copy progress is indicated on the progress bar.
• Click [Cancel] to stop copying midway through. (All the
data that has been copied will be deleted.)
1
3
2
HDWriter25_eng.book 36 ページ ２００７年１２月２６日 水曜日 午後５時４７分