Read before starting operation – Panasonic -eng User Manual

Page 8

Advertising
background image

8

Introduction

Read before starting operation

Contents of these operating instructions
• The description of Windows

®

in these operating instructions is

based on the Windows Vista

®

screen.

• Please note that the explanations and screen images in these

operating instructions may differ from the actual explanations
and screen images due to version upgrades of the software
and the use environments of PCs.

• In these operating instructions, the operations are described

based on the PAL system. The screen display may be different
on the NTSC system.

• Basic operations and basic terms for the PC are not explained

in these operating instructions. For information, refer to the
operating instructions of the PC.

• Reference pages are indicated with a “

l00

” in these operating

instructions.

Terms used in these operating instructions
• In these operating instructions, HD Writer 2.5E for HDC is as

also referred to as “HD Writer”.

General information about using the software
• Do not execute the following operations while the software is

running. Doing so may cause defects (damage to media, etc.).

- Turn off the PC or video camera, or restart the PC.
- Switch the user or log off.
- Change the screen settings.
- Use the screen saver or the power saving functions (makes

the PC enter the standby or sleep modes after a certain time
has elapsed without any operation on the PC).

- Use other software (recording or encoding software with high

CPU demand and memory requirements, in particular).

- Use the shared drive of another PC connected to the network.
- Revise or delete files and folders required by the software.

• Use an AC adaptor (and a battery) to power the notebook PC and

video camera. If the battery capacity drops too low during data
transfer, recording or copying operations may not function
properly.

Treatment of important images
• When deleting the original data from the PC after recording the

data to an SD card or DVD disc, before deleting confirm that
the image was properly recorded to the media.

• When editing images, the original data is edited directly and

cannot be restored. To retain the original data, first make a
backup copy of image data

(

l64)

before editing.

Copyright

• The recorded and/or edited content is for personal use only and may

not be reproduced or copied without prior consent.

• Microsoft

®

, Windows

®

, Windows Vista

®

, DirectX

®

, DirectDraw

®

and

DirectSound

®

are either registered trademarks or trademarks of

Microsoft Corporation in the United States and/or other countries.

• IBM

®

and PC/AT are registered trademarks of International Business

Machines Corporation of the U.S.

• Intel

®

, Core

TM

and Pentium

®

are registered trademarks or trademarks

of Intel Corporation in the United States and the other countries.

• SDHC logo is a trademark.
• Microsoft product screen shot(s) reprinted with permission from

Microsoft Corporation.

• LEADTOOLS

Copyright© 1991-2005 LEAD Technologies, Inc.

• Manufactured under license from Dolby Laboratories.

HDWriter25_eng.book 8 ページ 2007年12月26日 水曜日 午後5時47分

Advertising
This manual is related to the following products: