Panasonic -eng - Manual (Page 90)

90
Detailed settings for the respective functions
Settings/Convenient information
Adjust the settings related to the DVD drive.
1. [Select the default DVD burner]
Click [ ] to select a drive that is set as the destination in
the initial setting for recording or copying to a DVD disc.
2. [Choose the disc writing speed]
Recording speed for a DVD disc can be changed.
Select [Maximum] normally; however, if the recording fails,
select [Standards]. (This may correct the problem.)
• [Maximum] is selected in the initial setting.
3. [Auto Protect setting for DVD-RAM/RW]
When [Auto Protect ON] is selected, the protection setting
will be cleared temporarily when data is recorded in
AVCHD standard onto a DVD disc that is protected in the
AVCHD standard. (The protection setting will be turned on
when the DVD disc is ejected.)
Even a DVD disc that has been initialized or formatted,
which is not protected, will become a protected DVD disc
when it is ejected after recording data.
If [Auto Protect OFF] is selected, recording, etc. to
protected DVD discs is not possible.
Tip
z Since DVD-RAM/RW discs recorded in the [Auto Protect
ON] state are protected, they may not be initialized or
formatted with other DVD recording software or Windows
®
Explorer.
In this case, by formatting discs
( l94) (quick format * ) using
the format function of this software, the protect setting is
cleared for initialization and formatting with recording
software or Windows
® Explorer.
* Since standard formatting takes a long time, using quick
format is recommended.
[Drive settings] panel
1
2
3
HDWriter25_eng.book 90 ページ ２００７年１２月２６日 水曜日 午後５時４７分