Panasonic -eng - Manual (Page 91)

91
Detailed settings for the respective functions
Settings/Convenient information
Adjust the settings related to the hard disk of the PC.
1. [Select the default storage folder on the PC Hard Drive]
The storage folder on the PC can be changed.
To change the folder, click [
] button and select [Select a
new storage folder], and select a folder on the folder
selection window. Click [OK].
• Only folders with a name [HDWRITER] can be selected.
• If a folder other than [HDWRITER] is selected and then
[OK] is clicked, a confirmation message about creating
the folder is displayed. If [Yes] is selected, a
[HDWRITER] folder is created in the selected folder and
it is set as the storage folder. (If [No] is selected, the
window returns to the [Settings] window.)
• Among the folders set previously, the 3 most current
folders are stored and displayed on a list when the [ ]
button is clicked, so that one of them can be selected.
• Click [Open] button ( A ) to confirm the data contained in
the selected storage folder with Windows ® Explorer.
• Any folder with the compression, archive attribute
cannot be selected as the storage folder.
• Up to a maximum of 99 folders can be created in the
storage folder.
• If the storage folder is specified in the Copy window, it is
reflected in the [Settings] window, as well. ( l33)
2. [Select the work area]
Click the [ ] button to change the work area.
An [AVCHDTEMP] folder is automatically created on the
selected drive, and this folder will be used as the work
area.
• Select a drive with sufficient free space for operation.
• If a drive with a free space of 300 MB or less is selected,
only some parts of the edit function can be used. For a
drive with a free space of 4 GB or less, the function may
not operate properly.
• The work area means an area that is temporarily used
for operations.
[HDD settings] panel
1
2
A
HDWriter25_eng.book 91 ページ ２００７年１２月２６日 水曜日 午後５時４７分