Panasonic -eng - Manual (Page 95)

95
Disc format
Settings/Convenient information
2
Set the format contents.
1 Select a drive.
• If the drive is not displayed after replacing the DVD
disc or reconnecting the DVD drive, click [Refresh]
button.
2 Confirm the format method.
When [Quick format] is selected, quick format will be
executed. When it is not selected, standard format will
be executed.
Quick format:
A logical format will be executed, and the disc will be
formatted in a short period (about 1 minute). If data is
already recorded on the disc, only information in the
table of contents will be deleted.
Standard format:
The disc will be physically formatted. Depending on the
speed of the drive and the disc, it may take a long time.
(It may take 1 hour) If data is already recorded on the
disc, all data will be deleted.
• DVD-RAM discs are formatted in UDF 2.5 format.
3
Click [Start] button.
4
When the confirmation message is displayed, click
[Yes].
• If [No] is clicked, the display will return to the previous
window.
• Because the standard format takes time, the following
message will be displayed. Click [Yes] to continue.
1
2
HDWriter25_eng.book 95 ページ ２００７年１２月２６日 水曜日 午後５時４７分