Abt VP30 - Manual (Page 19)

5
Audio Operation
The iscan Vp30 features an audio delay function to exactly match the video delay incurred by the
video processing. The iScan VP30 accepts four discrete digital audio inputs, two coaxial (Audio 1,
2) and two optical (Audio 3 and 4) inputs, one analog audio input and four HDMI audio inputs.
The locations of the audio inputs are shown on the back panel diagrams earlier in this product
guide.
The factory default audio assignment is as follows:
Audio 1 (optical): Component 1
Audio 2 (optical): S-Video 1
Audio 3 (coaxial): S-Video 2
Audio 4 (coaxial): Component 2
Stereo (analog): Video 1
NOTE: The HdMi audio inputs can only be assigned to the same HdMi video input although any of the
other audio inputs can be assigned to any of the HdMi video inputs.
You can assign a digital audio
input to each Video input in the following manner:
You can assign an audio input to each Video input in the following manner:
. select a video input on the remote control.
2. Select Audio 1, 2, 3, 4, Stereo, HDMI or Off from the ‘Input Adjust/Audio Input’ menu.
NOTE: If an analog video input is selected, the HDMI option will not be available.