Abt VP30 - Manual (Page 7)

3
Unpacking and Inspection
Your iScan VP30 carton should contain the following items:
• iscan Vp30 Video processor
• Universal 6V@5A AC-to-DC Power Converter
• US Power Cord (International Customers, consult your local authorized DVDO reseller)
• remote Control
• iscan Vp30 product Guide
• iscan Vp30 Quick start Guide
• Serial Cable for Software Updates and Automation (1:1)
The iScan VP30 uses BNC-style analog connectors and an HDMI digital connector to provide
video output signals. You must purchase an output cable to connect to one of these outputs to your
display. Different displays have different input connectors, so check your display specifications to ensure
compatibility.
Both input and output cables can be supplied by your Authorized DVDO Reseller. To find your nearest
Authorized DVDO Reseller, go to www.dvdo.com/res/index.html. There are also a wide selection
of cables and adapters available on our website at www.dvdo.com/pro/pro_acc.html.
Display Compatibility Requirements
dVdo iscan video processing products are compatible with a wide range of displays. These include
digital TVs, projectors, and flat panel displays, as well as other emerging technologies that can support
480p or higher resolution video signals.
To determine if your display is compatible with the DVDO iScan VP30, look to see if it has one of the
inputs listed below. If not, then your display is probably limited to receive a standard NTSC, PAL or
seCaM interlaced signal and will not function correctly with iscan products.
Digital Inputs
HDMI input DVI-D input
Analog Inputs
VGA HD-15 input 5 BNC RGBHV inputs
Component input (YPbPr or YCbCr)
or