Abt VP30 - Manual (Page 28)

24
Factory Default
The factory default option allows you to reset system settings to the factory default.
1- Press either the Up or Down button. The FPD displays ‘No’.
2- Press the same button to switch to ‘Yes’.
3- Confirm this selection by pressing the Enter button.
The default factory settings are as follows:
• Input Selection : Auto
• Input Aspect Ratio : 16:9
• Picture Controls : midrange (0)
• Chroma Filter (CUEC) : Off
• Output Aspect Ratio : 16:9
• Output Resolution : 480P
• Sync : Sync on Y
• Output Color Space : RGB 4:4:4
• Output Type : Digital
• Auto Standby : Off
• Frame Rate : 60Hz input - 1:1 source-locked output
• 50Hz input - unlocked at 59.94 Hz
• User Mode : Normal
• Video Input Priority Settings :
• – Component 
• 2– Component 2
• 3– S-Video 1
• 4– S-Video 2
• 5– Video 
• 6– Video 2
• 7- HDMI 1
• 8- HDMI 2
• 9- HDMI 3
• 10- HDMI 4
• 11- SDI
• 12- RGBHV/Component
• digital audio input assignment
• Component 1 - Audio 1
• Component 2 - Audio 4
•
S-Video 1 - Audio 2
• S-Video 2 - Audio 3
• Video 1 - Analog
• Video 2 – off
• HdMi  – HdMi 
• HdMi 2 – HdMi 2
• HdMi 3 – HdMi 3
• HdMi 4 – HdMi 4
• sdi – off
• RGBHV/Component - Off
Software Update
use this parameter to install the latest software into your iscan Vp30. The latest software is
available at www.dvdo.com/update. The website includes complete download install instructions.