Abt VP30 - Manual (Page 34)

30
s e C T i o n 5 – a p p e n d i x
Non-Volatile Memory Settings
The iScan VP30 stores a variety of user settings in non-volatile memory. Non-volatile memory
retains its contents when power is lost. There is one group of system settings and one group of user
settings.
System Settings
Table 2. shows system settings.
Table 2. System Settings
Setting Description
Display Profile One of four display profiles or User
Auto Display Profile If enabled, selects a display profile based on input selection
Active Input one of many Vp30 inputs or auto active input
Auto StandBy off or on
Video Priority priority list of inputs when auto active input is on
User Mode normal or advanced
Border Level blank to quarter gray
HDMI Input input mode is automatic or pass through
Power LED On, Off or Auto.
Test Pattern Generator Current selected test pattern
SDI Line Offset One for 50Hz input and one for 60Hz input
Serial Port Bit Rate select an available baud rates.
HDCP Mode auto or on
Input/Format Settings
The iscan Vp30 supports an independent set of saved settings based on input and format as shown
in Table 3.
Table 3. Input/Format Settings
Settings Input Format
1 Composite  nTsC
2 Composite 2 PAL/SECAM
3 S-Video 1 nTsC
4 S-Video 2 PAL/SECAM
5 Component / RGBS 1 480i (NTSC)
6 Component / RGBS 1 576i (PAL/SECAM)
7 Component / RGBS 1 480p (NTSC)
8 Component / RGBS 1 576p (PAL/SECAM)
9 Component / RGBS 1 720p (ATSC)
10 Component / RGBS 1 1080i (ATSC)
11 Component / RGBS 2 480i (NTSC)
12 Component / RGBS 2 576i (PAL/SECAM)
13 Component / RGBS 2 480p (NTSC)
14 Component / RGBS 2 576p (PAL/SECAM)
15 Component / RGBS 2 720p (ATSC)
16 Component / RGBS 2 1080i (ATSC)
17 RGBHV/Component 480p (NTSC)
18 RGBHV/Component 576p (PAL/SECAM)
19 RGBHV/Component 720p (ATSC)
20 RGBHV/Component 1080i (ATSC)
21 RGBHV/Component VGa
22 RGBHV/Component sVGa
23 RGBHV/Component xGa
24 RGBHV/Component sxGa
25 sdi 480i (NTSC)