Hawk Industries Hawkjaw Sr. Manual 100K-2GSR Serial Numbers 121 to 140 - Manual (Page 32)

Grease Once per Week, Minimum
Wrench Hook
1. Surface grease the hook thread (T)
on the top wrench, middle wrench,
and bottom wrench.
2. Rotate the wrench nut (N) on the
top wrench, middle wrench, and
bottom wrench to spread grease on
the full thread area.
Wrench Nut
1. Surface grease the wrench nut
surface (NS) on the top wrench,
middle wrench, and bottom wrench.
Hook Pivot Bearing Cap
1. Pump the Hook pivot bearing cap
grease fittings (H1-H2) on the top
and bottom of each wrench.
Part Numbers
Part Name Part #
Straight Grease Fitting 061-1103K1
45° Grease Fitting 061-1103K2
90° Grease Fitting 061-1103K3
NOTE
Consistent lubrication of the wrenches
increases performance and component
life. D
Wrench Maintenance Wrench Maintenance
H1
NS T
N
H2
Maintenance & Repair 31