Muxlab Multimedia 16 x 16 Matrix Switch - Manual (Page 23)

© MuxLab Inc. Multimedia 16x16 Matrix Switch Installation Guide
Page 23
Network
The Network Settings screen allows the user to change the settings of the network:
• IP Address
• Mask Address
• Gateway Address
The user navigates the Network Settings screen using the arrow keys, and enters
information using the numeric keypad.
NOTE: In order to access the Network Settings screen, DHCP must be disabled (see
below). If DHCP is not disabled, the following screen will appear:
DHCP
The DHCP screen allows the user to set the state of the DHCP (Dynamic Host
Configuration Protocol) to ON or OFF.