Muxlab Multimedia 16 x 16 Matrix Switch - Manual (Page 48)

© MuxLab Inc. Multimedia 16x16 Matrix Switch Installation Guide
Page 48
5. Help
help or ?
Description: Display all the command list definition available
Arguments: <none>
Example: Display all the command list
help
?
Response: connect
connect –i <input port #> -o <output port #> {Connect 1 input port to 1 output port}
connect -i <input port #> -o all {Connect 1 input port to all output port}
connect -i <input port #> -o <from output port #>..<to output port #> {Connect 1 input port to a specific range of output
port}
disconnect
disconnect -i <input port #> {Disconnect 1 input port}
disconnect -o <output port #> {Disconnect 1 output port}
disconnect -all {Disconnect all input/output port}
… {and so on}
version
version <no parameters> {Get the current firmware version}
6. Name
name -i <input port #> “<name>”
Description: Set a name for the selected input port
Arguments: <input port #>: 1 to 16
<name>: up to 20 characters
Example: Set name “My DVD Player” for input port 5
name -i 5 “My DVD Player”
Response: Input Names:[“Input 1”,”Input 2”,”Input 3”,
“Input 4”,“My DVD Player”,“Input 6”,
“Input 7”,“Input 8”, “Input 9”,“Input 10”,
“Input 11”,“Input 12”,“Input 13”,
“Input 14”,“Input 15”,“Input 16”]
(or an error message if the command failed)
name -i
Description: Get a list of all the input port names
Arguments: <none>
Example: Get list of all input port names
name -i
Response: Input Names:[“Input 1”,”Input 2”,”Input 3”,
“Input 4”,“My DVD Player”,“Input 6”,
“Input 7”,“Input 8”, “Input 9”,“Input 10”,
“Input 11”,“Input 12”,“Input 13”,
“Input 14”,“Input 15”,“Input 16”]
(or an error message if the command failed)