Anritsu MP1763C - Manual (Page 40)

4-6
Section 4 OPERATING INSTRUCTIONS
4.2.3 DATA pattern setting
Select DATA with the keys.
Set DATA LENGTH with the and keys.
Select the digit to be set with the keys.
Set DATA LENGTH with the keys.
DATA LENGTH setting steps
2 to 65526: STEP 1 bit
65536 to 131012: STEP 2 bits
See section 1.2, “Functions,” for the following.
Set the page that is displayed at the BIT display with the set
DATA LENGTH as 16 bits/page. BIT of the displayed page
can be changed.
Setting value: 1 to DATA LENGTH/16
(LENGTH is multiple of 16)
1 to INT (DATA LENGTH/16)+1
(LENGTH is not multiple of 16)
Change the BIT value with the button below the LED. When
LOGIC is positive, lighting of the LED indicates high level.
Used the PRESET ALL or PAGE key when changing DATA
collectively.
PAGE 0 or 1 All BITs of the displayed PAGE are set to 0 or 1.
ALL 0 or 1 Pressing this key holding down the GUARD
key sets all BITs specified by DATA
LENGTH to 0 or 1.
An optional pattern can be output repetitively.
When a 16-bit patern is set:
Pattern: 0 0 0 0 0 1 0 1 1 1 1 1 1 0 1 0
1 1 1 0 1 0 0 0 0 0 0 1 0 1 1 1 1 1 1 0 1 0 0 0 0 0 0 1 0 1
DISPLAY
DATA LENGTH/ZERO SUBST LENGTH
DATA LENGTH
ZERO SUBST LENGTH A / B LOOP TIME
PAGE/ PATTERN SYNC POSITION
DISPLAY
DATA LENGTH/ZERO SUBST LENGTH
DATA LENGTH
ZERO SUBST LENGTH A / B LOOP TIME
PAGE/ PATTERN SYNC POSITION