Anritsu MP1763C - Manual (Page 57)

4-23
4.4.1 File save
Insert a formatted floppy disk (2HD, 2DD) into the floppy
disk drive. (For a description of how to format a floppy
disk, see section 4.4.3 “Disk formatting”.)
Select the PATT or OTHERS mode.
PATT mode: The contents set at section 4.2 are saved.
OTHERS mode: Contents other than PATT are saved.
Light the File No. LED by pressing the DIR/File No. key.
Set the file name (00-99) with the keys.
Save the file by pressing the SAVE key.
If another file was previously saved under the same file
name, the current file cannot be saved with the SAVE key.
If the old file is unnecessary, a new file can be saved by
pressing the shift key to switch to the shift mode, then
pressing the SAVE key (resave). If the old file is neces-
sary, change the file name and save the file.
Note: If the floppy disk does not have sufficient free
space for the size of the file to be re-saved, the file
cannot be re-saved. In this case, delete the file to be
re-saved from the floppy disk.
A file larger than 720k cannot be re-saved to a
floppy disk formatted as 1.44M.
4.4 MEMORY (Floppy Disk)