Anritsu MP1763C - Manual (Page 61)

4-27
Item
FREQUENCY
TUNING
MEMORY
PATTERN
LOGIC
ERR ADDITION
OFFSET
DATA TERM
DATA AMPLITUDE
DATA OFFSET
CLOCK TERM
CLOCK AMPLITUDE
CLOCK OFFSET
CLOCK DELAY
OUTPUT
DISPLAY
Initial setting
12, 500 MHz
ON
00 (PTN mode, FILE NO. mode)
PRBS 2 15 - 1, MARK RATIO 1/2
POS
OFF
VOH
GND
1.0 Vp-p
0V
GND
1.0 Vp-p
0V
0ps
OFF
1/1 SPEED
4.5 Parameters initialization
4.5 Parameters initialization
When returning the pattern type, amplitude, offset voltage, and other parameters to the factory shipment state, turn on the
power switch while pressing the LOCAL key.
This initializes the parameters. The initialization state is shown in Table 4.5-1.
Table 4.5-1 Initialization State