Lenovo ThinkServer RD630 User Manual
Page 120
6. Insert the TPM into the TPM connector on the system board.
Figure 66. Installing the TPM
7. If you have lifted up the riser card assembly 1, reinstall it into the chassis. See “Replacing the riser
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation, go to “Completing the parts replacement” on page 155. Then, you can
configure the TPM function in the Setup Utility program. See “Configuring the TPM function” on page 60.
Removing the TPM
Attention: Do not open your server or attempt any repair before reading and understanding “Safety information”
on page iii and “Guidelines” on page 71.
This topic provides instructions on how to remove the TPM if the server has one installed.
108
ThinkServer User Guide