Lenovo ThinkServer RD630 - Manual (Page 47)

ThinkServer RAID 700 Adapter (also known as ThinkServer 9260-8i SAS RAID Adapter)
The following illustration shows the connectors on the ThinkServer RAID 700 Adapter.
Figure 22. ThinkServer RAID 700 Adapter
1 Ports 7-4 3 Board-to-board connector
2 Ports 3-0
1 Ports 7-4
Used to connect a mini-SAS signal cable. See “Mini-SAS to mini-SAS signal cable connections” on page 39.
2 Ports 3-0
Used to connect a mini-SAS signal cable. See “Mini-SAS to mini-SAS signal cable connections” on page 39.
3 Board-to-board connector
Used to connect a ThinkServer RAID 700 Battery. See “Installing or removing the ThinkServer RAID 700
Battery” on page 96.
Expander card
This topic provides information to help you locate the connectors on the expander card if your server has
one installed in the lower slot of the riser card assembly 1.
The expander card works together with the RAID card by expanding the ports on the RAID card so that the
server can support up to 16 2.5-inch hard disk drives.
Note: The server must have a RAID card and an expander card installed to support more than eight hard
disk drives.
Chapter 3 . Product overview 35