Lenovo ThinkServer RD630 - Manual (Page 169)

5. Ensure that the cover latch is in the open position. Place the server cover above the chassis so that
the cover latch is aligned with the cover latch slot in the chassis. Then, lower the server cover onto
the chassis until the cover latch is inserted into its slot and both sides of the server cover engage the
guides on both sides of the chassis.
Figure 122. Installing the server cover
6. Pivot the cover latch 1 to the closed position and slide the server cover to the front of the chassis at the
same time until the server cover snaps into position and the cover latch is completely closed.
Figure 123. Closing the server cover completely
7. Install the server into a rack cabinet using the rail kit that comes with the server. See the Rack Installation
Instructions that comes with the server.
8. Reconnect external cables and power cord(s) to the server. See “Rear view of the server” on page 26 to
identify the connectors on the rear panel of the server.
Chapter 6 . Installing, removing, or replacing hardware 157