Lenovo ThinkServer TS140 User Manual
Page 59
6. Locate the appropriate memory module that you want to remove and open the retaining clips on both
ends of the memory slot. Then, grasp the memory module by its edges and carefully pull it straight
up to remove it from the memory slot.
Figure 14. Removing a memory module
7. If you are instructed to return the old memory module, follow all packaging instructions and use any
packaging materials that are supplied to you for shipping.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the removal procedure, go to “Completing the parts replacement” on page 84.
Installing the 2.5-inch solid-state drive or hard disk drive
Attention: Do not open your server or attempt any repair before reading and understanding “Safety information”
on page iii and “Guidelines” on page 37.
This topic provides instructions on how to install the 2.5-inch solid-state drive or hard disk drive into a
3.5-inch hard-disk-drive bracket.
Note: Ensure that you have a 3.5-inch to 2.5-inch drive adapter and a 3.5-inch hard-disk-drive bracket
available before the installation.
To install the 2.5-inch solid-state drive or hard disk drive, do the following:
.
Installing, removing, or replacing hardware
47