Lenovo ThinkServer TS140 User Manual
Page 60
Advertising
1. Install the 2.5-inch drive into the 3.5-inch to 2.5-inch drive adapter. Then, install the four screws to
secure the 2.5-inch drive to the drive adapter.
Figure 15. Installing the 2.5-inch drive into the drive adapter
2. To install the 2.5-inch drive with the drive adapter into the 3.5-inch hard-disk-drive bracket, flex the
bracket and align pin
1
, pin
2
, pin
3
, and pin
4
on the bracket with the corresponding holes in
the drive adapter.
Figure 16. Installing the 2.5-inch drive with the drive adapter into the hard-disk-drive bracket
3. Connect the signal cable and the power cable to the 2.5-inch drive.
48
ThinkServer TS140 User Guide
Advertising