Lenovo ThinkServer TS140 - Manual (Page 64)

5. Pull the blue handle to release and remove the hard disk drive from the hard disk drive cage.
Figure 21. Removing the secondary hard disk drive
6. Flex the sides of the blue bracket to remove the hard disk drive from the bracket.
7. To install the secondary hard disk drive, flex the sides of the bracket properly and align pin 1 , pin 2 , pin
3 , and pin 4 on the bracket with the corresponding holes in the hard disk drive. Do not touch the circuit
board 5 on the bottom of the hard disk drive.
Figure 22. Installing the hard disk drive into the bracket
52 ThinkServer TS140 User Guide