Actron 9640 - Manual (Page 104)

Ford Enhanced (OBD II) Diagnostics
6 – 24 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
6
After making a selection, press ENTER to establish a communication link.
Multiple PIDs may be sent if the vehicle is equipped with more than one
computer module — Powertrain Control Module (PCM), Transmission Control
Module (TCM), etc. The scan tool identifies them by their identification names
(ID) assigned by the manufacturer (i.e. $40 or $1F).
If the Scan Tool receives multiple
responses for a PID, such as MIL
STATUS, it displays the PID and with
the computer module ID blinking in
parentheses.
If one or more control modules stops
responding, the tool will display a
message that it is not responding. If you
choose to continue, dashes will replace
the module ID.
Press FUNC to return to the Ford Function List.
View Freeze Data
Refer to “View Freeze Data” on page 4-7 of Global OBDII Diagnostics.
Quick Tests
The Quick Tests checks the integrity and performance of the EEC-V and PTEC
system. It is performed first in most diagnostic procedures and after servicing
to verify the repair.
Three Quick Tests are performed on all Ford vehicles.
❒ KOEO On Demand: Key On-Engine Off (KOEO) Self-Test.
❒ KOER On Demand: Key On-Engine Running (KOER) Self-Test.
❒ KOEO Output State.
Additional Quick Tests for OBD II 7.3L Powerstroke Diesel vehicles.
❒ KOEO Injector Buzz Test
❒ KOER Glow Plug Test
❒ KOER Cylinder Contribution Test
❒ KOER Switch Test.
MIL STATUS($10) ON
MIL STATUS($1A) OFF
ENGINE(RPM)($10) 256[
ENGINE(RPM)($1A) 261 ~
Module $1F is not
Responding. Continue
Without it?
Yes <No> ~