Print data, Dcl data functions (eec-iv vehicles), View data – Actron 9640 User Manual
Page 97
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 6 – 17
Ford Historic Self-Test Routines
6
Press
ENTER to display the
definition(s) for that number. More than
one definition may be available for the
DTC number entered. Use the
UP/DOWN arrow keys to view them.
If the definition does not exist for the
vehicle, then a message displays.
Press
ENTER to return to the Lookup
Code screen or press the
FUNC key to
return to the Ford Function List menu.
Print Data
Refer to “Print Data” on page 4-20 of Global OBDII Diagnostics.
DCL Data Functions (EEC-IV Vehicles)
DCL (Data Communication Link) Data functions are used to view and record
engine data transmitted from the vehicle on EEC-IV vehicles beginning in 1990.
These functions allow viewing of data parameters in real time to pinpoint
problems when they occur. The tool also has the ability to record these data
parameters as the vehicle is operated to locate intermittent problems.
To view DCL Data Functions, select DCL
Data from the Ford Function List.
The tool displays the DCL Function
List. Select View Data and press
ENTER.
View Data
The View Data function allows the mechanic to view a Personal Identification
Number (PIDs) in real time. Simply stated, as the PCM monitors the vehicles
PIDs, they are simultaneously transmitted to the scan tool. Viewing data is also
used for observing sensor data and the ON/OFF state of switches, solenoids,
and relays.
KOEO Code:
058
VAT Sensor
Above Max Voltage
[
-40 F Indicated
~
KOER Code:
058
Idle Switch
]
CKT Grounded
[
~
Memory Code:
058
VVAT Sensor
Above Max Voltage
[
-40 F Indicated
~
Undefined Code
ENTER To Try Again~
Ford Function List ?
6)Output Sw Test ]
` 7)DCL Data
[
8)Cyl Balance Test ~
DCL Function List
?
` 1)View Data
2)Record Data
3)Playback Data
~