Actron 9640 - Manual (Page 62)

Global OBDII Diagnostics
4 – 22 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
4 4
CODE LOOKUP
Code Lookup is used to look up definitions of Diagnostic Trouble Codes
(DTCs) stored in Scan Tool. Scan tool does not require power from vehicle to
perform this function, the internal battery power can be used.
To look up DTC definitions, select Code
Lookup from OBDII Function List.
When entering codes, all characters
must be entered. Only one character
can be changed at a time.
❒ Use LEFT/RIGHT arrow keys to
scroll to desired character.
❒ Use UP/DOWN arrow keys to
change selected character.
Press ENTER when done.
Use UP/DOWN arrow keys to display
previous or next DTC. DTCs for the
code type selected (i.e., P, B, C, or U)
are listed in numerical order.
To enter another DTC number, press BACK key. Press BACK key again to
return to OBDII Function List.
If DTC definition does not exist for
vehicle, then a message, NO DTC
DEFINITION FOUND, displays on
screen.
If DTC is manufacturer specific, DTC is
assigned to display. Refer to vehicle
service manual for exact definition.
OBDII Function List ?
13)Review Data ]
14)Print Data [
15)Code Lookup ~
Lookup Code: P0000
Use Arrow Keys ^
To Select Or Press
ENTER To Lookup
~
P0622
Generator F-Term.
]
Field F Control [
~
P1C95
No DTC Definition
]
Found. See [
Service Manual ~
P1605
Computer and
]
Auxiliary Outputs. [
See Service Manual ~