Lenovo ThinkServer TD350 - Manual (Page 148)

5. If you are instructed to return the old hot-swap redundant power supply, follow all packaging instructions
and use any packaging materials that are supplied to you for shipping.
Installing a 2.5-inch drive into a 3.5-inch-drive bay
Attention: Do not open your server or attempt any repair before reading and understanding “Safety information”
on page iii and “Guidelines” on page 63.
Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.
Notes:
• Ensure that you have a 3.5-inch to 2.5-inch drive adapter and a 3.5-inch drive bracket available before
the installation.
• Only on server models with fifteen 3.5-inch-drive bays can you install both 2.5-inch drives and 3.5-inch
drives into the same server.
To install a 2.5-inch drive into a 3.5-inch-drive bay, do the following:
1. Locate the appropriate storage-drive bay. See “Front view of the server” on page 17.
2. Press the release button 1 to open the handle of the dummy tray.
Figure 97. Opening the handle of the dummy tray
134 ThinkServer TD350 User Guide and Hardware Maintenance Manual