Lenovo ThinkServer TD350 User Manual

Page 94

Advertising
background image

The following table explains the memory module installation order for servers that have two microprocessors
(CPU1 and CPU2) installed.

Table 7. Memory module installation order in mirroring mode for servers with two microprocessors

CPU1 DIMM

CPU2 DIMM

A1

A2

B1

B2

C1

C2

D1

D2

A1

A2

B1

B2

C1

C2

D1

D2

DIMM
installation order

1

9

2

10

5

13

6

14

3

11

4

12

7

15

8

16

Memory module installation order in sparing mode

The sparing mode provides memory redundancy. In this mode, the RAS features are available. For
information about the RAS features, refer to the related section in “Features” on page 8.

Note: All memory modules to be installed must be the same type (LV RDIMM or RDIMM). It is also
recommended that all memory modules have the same frequency, voltage, and number of ranks.

Your server supports rank sparing mode. In rank sparing mode, one rank of a memory module works as the
spare rank for the other ranks on the same channel. The spare rank is not available as system memory. To
enable rank sparing mode, ensure that:

• At least three ranks are available in one channel.

• The capacity of the spare rank must be the same with or larger than the capacity of other ranks within

the same channel.

The following table explains the memory module installation order for servers that have only one
microprocessor (CPU1) installed.

Table 8. Memory module installation order in sparing mode for servers with one microprocessor

CPU1 DIMM

A1

A2

B1

B2

C1

C2

D1

D2

DIMM
installation order

1

2

3

4

5

6

7

8

The following table explains the memory module installation order for servers that have two microprocessors
(CPU1 and CPU2) installed.

Table 9. Memory module installation order in sparing mode for servers with two microprocessors

CPU1 DIMM

CPU2 DIMM

A1

A2

B1

B2

C1

C2

D1

D2

A1

A2

B1

B2

C1

C2

D1

D2

DIMM
installation order

1

2

5

6

9

10

13

14

3

4

7

8

11

12

15

16

Memory module installation order in lockstep mode

In lockstep mode, the RAS features are available. For information about the RAS features, refer to the
related section in “Features” on page 8.

Note: All memory modules to be installed must be the same type (LV RDIMM or RDIMM). It is also
recommended that all memory modules have the same frequency, voltage, and number of ranks.

80

ThinkServer TD350 User Guide and Hardware Maintenance Manual

Advertising