Lenovo ThinkServer TD350 User Manual
Page 161
Advertising
• To remove the AnyRAID-adapter tray, press the release tab
1
. Then, grasp the tray and carefully pull
it out of the chassis.
Figure 112. Removing the AnyRAID-adapter tray
• To reinstall the AnyRAID-adapter tray, locate the mounting area on one side of the chassis. Insert the
tab into the hole
1
and align the two pins on the tray with the two gaps
2
in the mounting area.
Then, pivot the AnyRAID-adapter tray downward until it snaps into position.
Figure 113. Installing the AnyRAID-adapter tray
10. Touch the static-protective package that contains the new AnyRAID adapter or the pass-through board
to any unpainted surface on the outside of the server. Then, take the new AnyRAID adapter or the
pass-through board out of the package.
.
147
Advertising