Removing and reinstalling the cooling shroud – Lenovo ThinkServer TD350 User Manual
Page 82
Advertising
1. On each side of the server, remove the screws that secure the rack handle and then remove the rack
handle from the chassis.
Figure 29. Removing the rack handles
2. To reinstall the rack handles, align the screw holes in the rack handle with the corresponding holes in the
chassis. Install the screws to secure the rack handle on each side of the server.
Figure 30. Installing the rack handles
Removing and reinstalling the cooling shroud
The cooling shroud must be removed to allow access to most server components. This topic provides
instructions on how to remove and reinstall the cooling shroud.
68
ThinkServer TD350 User Guide and Hardware Maintenance Manual
Advertising