Konica Minolta KIP 7900 - Manual (Page 10)

KIP Unattend Operator Guide
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP America, Inc. © 2011 KIP America, Inc.
- 8 -
Copy mode delay
Allows the user to adjust the interval (in seconds) the machine will use when interrupting the print queue
for copy mode. It can also be set to zero for infinity and will require a key stroke to escape out of Copy
mode. This is not used on HDP printers.
Unattended delay
Allows the user to adjust the time interval (in seconds) in which the KIP Controller will seek the monitor
paths for files to be printed. The default should be set to 2 seconds.
Default DPI
Allows a user to set a conversion DPI if not specified in a submitted file or job ticket.
Print Separator Sheet
Users can choose to print a separator sheet between
each job, or between each set. This feature has been
found to be very useful for users of KIP folding and finishing
systems.
Deck Info
Allows the user to override the media in a specific drawer of the printer, or the printer can be set to
automatically detect the media loaded into a drawer. It is also possible to adjust the winuntd.ini file for
custom paper types, such as BBOND or TRANS. Please see the [PaperTypes] sections of the winuntd.ini
file.
Save
Allows the user to save changes made to the miscellaneous setup.
Cancel
Allows the user to exit the miscellaneous setup screen and return to the configuration menu.