Konica Minolta KIP 7900 - Manual (Page 27)

KIP Unattend Operator Guide
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP America, Inc. © 2011 KIP America, Inc.
- 25 -
CardReaderEnabled=False
True enables the use of a card reader; False disable the use of a card reader. Used in Europe.
MultiSheetFeederEnabled=False
Used in conjunction with a feeder drawer on the KIP 700M and 7100 systems.
Embedded=True
MultiThreadPDF=True
Uses the multithread (Dual Core) capabilities of the IPS for processing multi-page pdf files.
ExpandedMagenta=False
Used in conjunction with the KIP KC80
FolderPort=0
Used when connecting a KIP Controller to a Folding Unit. Value is a Com Port (serial port) number.
Correct number will depend on the unique configuration and the number of serial ports on the KIP
Controller. Controllers not connected to a Folding Unit should use a value of 0.
SerialDisplayPort=-1
Used when connecting an internal KIP Controller to an LCD Display Window on KIP 4000 and 5000
models. Value is a Com Port (serial port) number. Correct number will depend on the unique
configuration and the number of serial ports on the KIP Controller. Also, InternalController= must be set
to True, and the Unattend program must be running, for the LCD Display to function. Controllers not
connected to an LCD Display should use a value of -1.
FormTop=1170
FormLeft=6165
FormHeight=11085
FormWidth=14625
FormState=0
ShowColorKey=TRUE
Debug=-1
Used for diagnostic purposes only
PrintExe=C:\PROGRAMS\KIPPRNT.EXE