Konica Minolta KIP 7900 - Manual (Page 9)

KIP Unattend Operator Guide
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP America, Inc. © 2011 KIP America, Inc.
- 7 -
Feeder Media
Type of media (bond, vellum, film, on hold) in the feeder
(Starprint 8000) can be specified here.
Separator Media
Type of media on which the separator sheet should print can
be specified here.
Log file Directory
Allows the user to set a directory in which the Printer status and accounting data should be stored. This
can be input as a UNC path to a server location. Note: The KIP controller must have access to this
location. The default path of c:\monpath1\logdir will continue to receive the print logs.
Print Configs
Allows the user to print all configuration files (.INI files) on the embedded controller with the touch of a
button.
Cold Sleep Settings
Sleep time and wake up time are intuitive for power saving.
Users can set up time for sleep when there’s no apparent
printing that’s needed, or can set up time for the printer to
wake up. By default, the printer will start warming back up
anytime a Job / file arrives at a monitored path for printing. It will resume cold sleep 15 minutes later. This
can be set to 24 hour time or 12 hour time. Please check the time zone for proper settings.