Konica Minolta KIP 7900 - Manual (Page 25)

KIP Unattend Operator Guide
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP America, Inc. © 2011 KIP America, Inc.
- 23 -
MCC8BoardTest=False
IgnoreTime=True
When set to False, Unattend sorts jobs by the times created within the Job Ticket. But since these Job
Tickets are created on the user workstations and copied to the KIP Controller, this can lead to jobs being
scheduled for moments or hours later, if the workstation clocks (and workstation Time Zones) are not
synchronized with the KIP Controller. When set to True, IgnoreTime= simply prints the jobs in the order
they were received by Unattend, ignoring any perceived ‘scheduled’ times.
ReprintMultiple=True
KipCopier=False
MultiPagePDF=True
ReverseCGM=False
RedPrinter=False
StampInRed=False
HeaderInRed=False
PowerScriptInstalled=True
Used to define a method of PDF file conversion. In previous versions of KIP, more than one PDF
conversion option was available, and this legacy setting was used to enable PowerScript. In KIP 5,
Powerscript is the only available conversion option. This setting should be set to True even if the
Powerscript Hardware Key has not been attached.
LPDDisplay=True
ViewOutput=True
Used in troubleshooting. If HardwareConnect=False, then Unattend is running in demo mode.
ViewOutput= determines whether a job sent to Unattend ‘prints to screen’, or simply disappears from
the queue.
QuickView=True
Determines if quickview will be used to display output, else ultraview
OutputPaperSquareFootage=True
Will use paper dimensions when set to true to calculate print logging information. Will use image
dimension to calculate print logging information when set to False